Magnetic Shop Shims
Set of 28 Shop Shims with storage case, finally got these in stock again.Each shim is ground on 6 sides with two magnets on the bottom face, there are 7 different heights and 4 pieces of each height in a set. These shims have...
Wood Handle Bar Clamp
16 x 8
20 x 10
MEGA Square Overview
The original Mega Square is available in a 12 or 8 inch size with two material choices: Cast Iron (FE) or Cast Aluminum (AL). All Mega Squares feature a stiff “flange and web” design that is fully machined on all...
Monster Square Overview
The original Monster Square is available in a 12 or 8 inch size with two material choices: Cast Iron (FE) or Cast Aluminum (AL). All Monster Squares feature a stiff “flange and web” design that is fully machined...
Magic Square Overview
There are so many ways to use this square it seems like Magic. It’s two squares in one- when you purchase one Magic Square you get two individual squares that also link together to form 5 different combo squares. ...
Fabricator Package Overview
Build with 4 of the fastest squares, fit up an entire frame at once. Three choices to choose from: All cast iron, all aluminum, or a mix package. For descriptions of the individual squares see: Mega, Monster.
Fireball Tool Bench Vise
What's special about this bench vise:
This vise has a specially designed 4 point swivel base designed to match up with holes on most common welding tables. Whether you have a table with 5/8" or 16 mm holes, if the spacing...
Fireball tool newest tool! The universal cast Iron fixture plate. This plate is great for a stable machined flat surface to build or fabricate off of. Is your welding table not flat? No problem make your own using the utimate material for welding...
Locking C-Clamp Pliers
These locking pliers from Strong Hand Tools area the perfect companion to our Fireball Squares. Sold in sets of 2 or 4.Aluminum (AL) SquaresSwivel tip models are recommended for use with aluminum squares to avoid leaving marks...
Inserta Clamps- T Handle
These clamps from BuildPro are perfect for use on tables with 5/8" or 16 mm holes.
While originally designed for 5/8" holes, the difference in size between 5/8 and 16 mm is only 0.005" (less than two Post-It Notes...