Use MagSquares as right angle squares for your fixture needs, or use the threaded holes on the side to create your own custom magnetic fixture. Turn the top knob 180 degrees to align the magnetic poles into the "on" position. This magnet does not require any electricity.
Machined at 90 degrees with M6 threaded holes on 4 sides. The strongest magnetic force is on the bottom face, with a lesser force transmitted to the side faces. Note that you can use the magnetic force on up to three sides, but the bottom face must be in included and the two other sides need to be parallel with each other and not intersect. Think a "U" shape rather than a corner. This is due to how the magnetic fields interact with each other.
Their small size hides their strong holding power. Magnet forces are based on 1/4 steel, thinner plates will experience smaller holding forces.
|Model||Length||Width||Height||Maximum Pull Force*||Max Shear Force*|
|MagSquare 400||400 lbs|
|MagSquare 600||600 lbs|
*Measured on 1/4" steel