What Makes Fireball Squares The Best?
Whether you’re a beginner, hobbyist, or professional welder, we’ve all ran into the same issues in fabrication. I don’t know about you, but I’m getting pretty sick and tired of my material warping when I weld. It’s almost like everyone just accepts the imperfection. But why settle for less? Fireball squares are awesome because you’re able to clamp to a flat surface for an easy and accurate 45 or 90 degree weld.
Fireball Squares
Cast Iron VS Aluminum
-
What You Get
-
Optional Add Ons
Edge Location Tabs
Our revolutionary tabs allow you to align your material up so that you don’t even need a welding table! Don’t spend thousands on a flat table, just use our squares! Tighten the tabs onto the front or back of your square and you can immediately get to work. Sure, there are different jigs out there, but can they line your material perfectly in seconds?
Edge Alignment Pins
Install our edge alignment pins on any square to create a large, overhanging edge which can be used to index the square on a different plane. Depending on the square, this allows you to create edges which are 90 degrees (perpendicular), 45 degrees, parallel, and even 60 and 30 degrees from the edge.
- Use it with our Monster squares to create a speed square for layout.
- Use it to hang the square off the edge of a table for working vertical or perpendicular to table surface
- Use it to elevate the squares off the ground or table for extra clearance when you’re fitting and welding entire frames
- Tip! If trying to create a parallel edge with the mega square for marking, use our shims to get that perfect distance!
12"
Flange & Web
- 12” squares have a profile similar to an I Beam where the web is centered on the flanges.
- 8” squares are similar to a “C” channel where the web is off to one side of the flange.
8"
What is Black Oxide?
Black Oxide, blackening, oxidizing, oxiding, black passivating, gun bluing . . . these terms all refer to the process of forming a black iron oxide on the surface of ferrous metals.
The black oxide process is a chemical conversion coating. This means that the black oxide is not deposited on the surface of the substrate like nickel or zinc electroplating. Instead, the black oxide coating is produced by a chemical reaction between the iron on the surface of the ferrous metal and the oxidizing salts present in the black oxide solution. These oxidizing salts include penetrates, catalysts, activators and proprietary additives which all take part in the chemical reaction. The result of this chemical reaction is the formation of black iron oxide, magnetite (Fe3O4), on the surface of the metal being coated. Black oxide has a range of unique properties and benefits including corrosion protection & reduced friction.