The 24 x 12 inch plate is the larger version of our 10 x 10 plate. This plate can be used as a standalone work surface when retrofitted to a grinder or drill press, or used in multiples to create a welding table. Each plate is over 3/4” thick with reinforced ribbing.
The holes are spaced 2” apart, diameter of 5/8 to fit BuildPro tooling.
The mounting holes are fitted with bushings to create the mounting surface, there are two options to choose from:
- Non-locating bushing. Suggested for situations where the plate does not need to be removed often, or does not need to be replaced with great precision to its previous spot.
- Locating Bushing. Suggested for situations where the plate may see frequent removal and needs to be replaced in the same spot with a precision of less than 0.005”.
- Use of the locating bushing will require the surface be flat to within +/- 0.005” every 24”x24”.
- Counterbores need to be drilled in the bearing surface with a hole to hole distance varying by no more than +/- 0.002” with no accumulation error.