Use this bar to show information about your cookie policy.
Roll over image to zoom inClick on image to zoom
/
Blemished Dragon Wagon 54" x 30"
Producing large castings with perfect surfaces is a difficult task. The larger the surface area, the more likely there is to be some air pockets or voids during the casting process that only show up after machining.
Our castings are optimized to produce a high quality top surface, but even a typical table will often have some small imperfections on the top or side of the machined surfaces.
When the tables experience a higher number or severity of surface defects we designate them as factory seconds and sell them at a discounted price.
These tables have a Black Oxide coating instead of the standard Dragon Scale coating.
What qualify as blemishes?
Scratches/Scrapes
Porosity
Rust
Coating- Corrosion, spatter, and scratch resistant Black Oxide
Ribbing- Full height 4" ribbing engineered to torsional rigidity
Holes- All counterbore and chamfered on back sides
Side face on the tables are 4" tall with 1 row of holes.
The modular leg accessory system provides an extensive range of customization options.
1/2" thick table that shares all the same fixtures as the 1" thick table.
1/2” thick Gray Cast Iron on top and 1/2” thick sides, additional reinforcement ribs underneath. Machined flat on all 5 sides to within +/- 0.0025” per 24” x 24” area. Side apron on the tables are 4” tall with 1 row of holes.
Connect Your Tables Together
Connect any number of tables together by using tacking bolts along with spacers.
Counterbore Underside
Chamfer on top and bottom
Optional Accessories
What Comes With The Workstation Kit?
Slag Tray Assembly
FA75-DGW-SGT542-PPK
Sweep the material through without removing the tray and dumping it.
How does the FA75 system compare to other Table Systems?
FA75 - Ø3/4"x2"
FA625 - Ø5/8" x 2"
2" Grid Pattern
5/8" Diameter Hole
FA16 - Ø16mm x 2"
2" Grid Pattern
16mm Diameter Hole
FA28 - Ø28mm x 4"
4" Grid Pattern
28mm Diameter Pattern
Fixturing System
FA75 - Ø3/4" x 2"
The Fireball Tool fixture system is superior to others on the market. It features blocks that can be used in many different ways to maximize their usage. It also can be incrementally adjusted to ensure maximum coverage as efficiently as possible while others fail to reach certain distances without a complicated fixture.