- The Mega Square is designed to quickly set your workpiece to 90 or 45 degrees.
- Tabs help eliminate twisting and warping in the final workpiece.
- Clamping is simple with multiple surfaces for quick and rigid attachment.
- Roomy joint access for welding, gluing, nailing, riveting, etc.
- The original Monster Square is available in a 12 or 8 inch size with two material choices.
- The Monster Square is designed to quickly set your work piece to 90 or 45 degrees.
- Clamping is simple with multiple surfaces for quick and rigid attachment.
- Use the radius on the tabs to use the Monster Square as a traditional speed square for layout.
- Use it as an ordinary, adjustable angle square that adjusts from 40 to 180 degrees.
- Right Angle 90 Degree Square with generous weld accessibility. Total height of 8” in this configuration.
- Tall 12” square when fully opened and locked into place
- Remove the fasteners to get two individual squares
- Use the large V-groove to hold large round tubing or pipe
- Compact configuration for use in tight spaces.
- 6" x 4" x 1.5", the 4" width is perfect for picket spacing on gates and fences.
- They are the first square we offer which has a built in 60/30 degree angle.
- The cutout provides just the right amount of joint access when using it to clamp things at 90 degrees.
Mega Square 12" | Mega Square 18 | Monster 12" | Monster 8" | Magic Square | Minion Square | |
|
|
|
|
|
|
|
Size (IN) |
12" x 12" x 3" |
8" x 8" x 1.5" |
12" x 12" x 3" |
8" x 8" x 1.5" |
8" x 8" x 3" |
6" x 4" x 1.5" |
Weight (lbs) |
7.5/20.5 |
1.8/4.8 |
5.2/14.5 |
1.6/4.4 |
2/5 |
1/3 |
Material Finish |
AL/FE/Dragon Scale (FE) |
AL/FE/Dragon Scale (FE) |
AL/FE/Dragon Scale (FE) |
AL/FE/Dragon Scale (FE) |
AL/FE/Dragon Scale (FE) |
AL/Dragon Scale (FE) |
Cast Iron VS Aluminum
Cast Iron
Pros
- Great for heavy duty projects
- Excellent resistance to deformation and raising burrs when scratched.
- Some natural resistance to weld spatter.
Cons
- Heavy (Not ideal for mobile welding)
- Susceptible to rust.
Aluminum
Pros
- Lightweight (Ideal for welding on the go)
- Resistance to deformation vs aluminum billet
- Some natural resistance to weld spatter.
Cons
- Can be be damaged if dropped or if used in heavy duty projects.
New Dragon Scale
Fireball’s new Dragon Scale coating provides the corrosion resistance of our previous black oxide finish with the added benefit of enhanced spatter resistance. It’s spatter resistance needs to be seen to believed; it out performs even the best weld spatter sprays without the use of any sprays.
-
What You Get
-
Optional Add Ons
4 Edge Location Tabs
Our revolutionary tabs allow you to align your material up so that you don’t even need a welding table! Don’t spend thousands on a flat table, just use our squares! Tighten the tabs onto the front or back of your square and you can immediately get to work. Sure, there are different jigs out there, but can they line your material perfectly in seconds?
4 Tool-less Thumbscrews
The original Mega Square is available in a 12 or 8 inch size with two material choices: Cast Iron (FE) or Cast Aluminum (AL). All Mega Squares feature a stiff “flange and web” design that is fully machined on all outer edges with tapped holes on the sides for mounting tabs.
Made In USA - Patent Pending
Roomy joint access for welding, gluing, nailing, riveting, etc.
Whatever process you’re working with, it probably benefits from some clearance around the joint.
Tabs help eliminate twisting and warping in the final work-piece.
The machined squares and tabs always create the perfect plane for your work-pieces to rest on. Tabs also let you easily hold round tubing.
Clamping is simple with multiple surfaces for quick and rigid attachment.
Stop spending your time and focus figuring out clamping strategies, or worse, clamping your straight workpiece to crooked surfaces.
Perfect For Angle Iron
Edge Alignment Pins
Install our edge alignment pins on any square to create a large, overhanging edge which can be used to index the square on a different plane. Depending on the square, this allows you to create edges which are 90 degrees (perpendicular), 45 degrees, parallel, and even 60 and 30 degrees from the edge.
- Use it with our Monster squares to create a speed square for layout.
- Use it to hang the square off the edge of a table for working vertical or perpendicular to table surface
- Use it to elevate the squares off the ground or table for extra clearance when you’re fitting and welding entire frames
- Tip! If trying to create a parallel edge with the mega square for marking, use our shims to get that perfect distance!
The original Monster Square is available in a 12 or 8 inch size with two material choices: Cast Iron (FE) or Cast Aluminum (AL). All Monster Squares feature a stiff “flange and web” design that is fully machined on all outer edges with tapped holes on the sides for mounting tabs.
Made In USA - Patent Pending
Designed to quickly set your work-piece to 90 or 45 degrees
Speed squares and machinist squares are made for visual inspection and checking AFTER setup, the Monster Square is designed to get those parts square in the first place.
Tabs help eliminate twisting and warping in the final work-piece
The machined squares and tabs always create the perfect plane for your work-pieces to rest on. Tabs also let you easily hold round tubing.
Clamping is simple with multiple surfaces for quick and rigid attachment.
Stop spending your time and focus figuring out clamping strategies, or worse, clamping your straight workpiece to crooked surfaces.
Use the radius on the tabs to use the Monster Square as a traditional speed square for layout.
There are so many ways to use this square it seems like Magic. It’s two squares in one- when you purchase one Magic Square you get two individual squares that also link together to form 5 different combo squares. A zinc adjustable handle provides tool-less angle adjustments
Use it as an ordinary, adjustable angle square that adjusts from 40 to 180 degrees.
Right Angle 90 Degree Square with generous weld accessibility. Total height of 8” in this configuration.
Tall 12” square when fully opened and locked into place
Remove the fasteners to get two individual squares
Use the large V-groove to hold large round tubing or pipe
Put the squares back together but with the mating surfaces reversed. This allows you to use the square to hold material offset to each other.
Use a second pivot point on the square with the mating surfaces reversed to change the balance of the square, it’ll seem like an entirely different square tool!
These squares come in a compact configuration for use in tight spaces. Each square measures 6" x 4" x 1.5", the 4" width is perfect for picket spacing on gates and fences. They are the first square we offer which has a built in 60/30 degree angle. The cutout also provides just the right amount of joint access when using it to clamp things at 90 degrees.
Compact Size For Tight Spaces
4" Width Perfect For Picket Spacing
Clamp The Angles Together To Create Custom Spacing