- Coating- Corrosion, spatter, and scratch resistant Dragon Scale
- Ribbing- Full height 4" ribbing engineered to torsional rigidity
- Holes- All counterbore and chamfered on back sides
- Side face on the tables are 4" tall with 1 row of holes.
- The modular leg accessory system provides an extensive range of customization options.
- 1/2" thick table that shares all the same fixtures as the 1" thick table.
- Flatness (+/- .004) full length, corner to corner
Lead Time
Please allow a 4 week lead time for any new orders placed.
360° View 3D Model (Click & Drag)
Dragon Wagon 36" x 24"
| Tabletop Dimensions | 36" x 24" (3' x 2') |
| Table Side Height (in) | 4 |
| Table Thickness (in) | 1/2" |
| Hole Diameter (in) | 3/4" |
| Grid Pattern (in) | 2" |
| Material | Gray Cast Iron |
| Finish | Dragon Scale |
| Table Top Weight (lbs) | 250 |
| Shipping Weight (lbs) | 275 |
| Leg Type | Standard Duty |
| Number of Legs | 4 |
| Capacity Per Leg | 600 |
| Rated Weight Capacity with Legs | 1500 |
Tabletop Construction
1/2” thick Gray Cast Iron on top and 1/2” thick sides, additional reinforcement ribs underneath. Machined flat on all 5 sides to within +/- 0.0025” per 24” x 24” area. Side apron on the tables are 4” tall with 1 row of holes.
Dragon Scale Coating
Counterbore
Chamfer & Ribbing
Dragon Scale Coating
Modular Accessory Legs
Modular system that allows for a huge variety of accessory customization. (Add shelves seats, leg braces, slag tray and more.
Adjustable Height Leg
Leg Height: 21" - 31"
Table Surface Height: 25" - 35"
Static Load Capacity: 1,200 lb
Outer Tube Outside Diameter: 3.3", 0.20" Thickness
Inner Tube Otuside Diameter: 2.75", 0.15" Thickness
Adjustable Leg + Caster
Leg Height: 26" - 36"
Table Surface Height: 30" - 40"
Static Load Capacity: 750 lb
Outer Tube Outside Diameter: 3.3", 0.20" Thickness
Inner Tube Otuside Diameter: 2.75", 0.15" Thickness
Distance between legs:
Long Side: 26.5"
Short Side: 13.5"
Bolts are to be installed parallel to the short side.
How does the FA75 system compare to other Table Systems?
FA75 - Ø3/4"x2"
- 2" Grid
- 3/4" Hole Diameter.
- 1/2" Thick
FA625 - Ø5/8" x 2"
- 2" Grid Pattern
- 5/8" Diameter Hole
FA16 - Ø16mm x 2"
- 2" Grid Pattern
- 16mm Diameter Hole
FA28 - Ø28mm x 4"
- 4" Grid Pattern
- 28mm Diameter Pattern
Fixturing System
FA75 - Ø3/4" x 2"
The Fireball Tool fixture system is superior to others on the market. It features blocks that can be used in many different ways to maximize their usage. It also can be incrementally adjusted to ensure maximum coverage as efficiently as possible while others fail to reach certain distances without a complicated fixture.
FA625 - Ø5/8" x 2"
FA16 - Ø16mm x 2"
FA28 - Ø28mm x 4"
What Is Dragon Scale Coating?
Fireball’s new Dragon Scale coating provides the corrosion resistance of our previous black oxide finish with the added benefit of enhanced spatter resistance.
It’s spatter resistance needs to be seen to believed; it out performs even the best weld spatter sprays without the use of any sprays.
How to Install Legs on a Dragon Wagon
This is how to install legs on a Dragon Wagon. Remember, it is heavy so try to get a friend to help you.
Step 1: Stand the table up on its side (You can use a clamp in one of the side holes in order to get a grip, there is a GIF at the bottom that demonstrates this)
Step 2: Brace the table so it does not tip over.
Step 3: Put the legs on horizontally, starting from the bottom legs (make sure the holes line up on each leg across from one another). Torque the bolts to 30 ft. lbs.
Step 4: Stand the table up now that all legs are on. Remember, the table weighs upwards of 200 lbs - 400 lbs depending on the size, so be very careful (this is where your friend can help)