- Modular system that allows for a huge variety of accessory customization. (Add shelves seats, leg braces, slag tray and more.
- Heavy Duty
- Telescopic and Adjustable in 1 inch increments.
- Designed for attaching other accessories and equipment.
- Flanged design eliminates need for leg cross bracing.
- No wobble design. Special bolts remove gaps between telescoping tubes.
- Leveling Pad & Caster: M30 thread
Description
Modular Accessory Legs
Adjustable Height Leg
Leg Height: 21" - 31"
Table Surface Height: 25" - 35"
Static Load Capacity: 1,200 lb
Outer Tube Outside Diameter: 3.3", 0.20" Thickness
Inner Tube Otuside Diameter: 2.75", 0.15" Thickness
Adjustable Leg + Caster
Leg Height: 26" - 36"
Table Surface Height: 30" - 40"
Static Load Capacity: 750 lb
Outer Tube Outside Diameter: 3.3", 0.20" Thickness
Inner Tube Otuside Diameter: 2.75", 0.15" Thickness
DIY Legs for 4-IN-1
Tube length: 29.5" (3/16 wall thickness)
Top Plate: 5/16" thick
Bottom Plate: 5/16" thick
Leveling Pad: 2" thread length (1/2-13 threads), 2.75" total length.
Nuts: 1/2-13 threads
How to Install Legs on a Dragon Wagon
This is how to install legs on a Dragon Wagon. Remember, it is heavy so try to get a friend to help you.
Step 1: Stand the table up on its side (You can use a clamp in one of the side holes in order to get a grip, there is a GIF at the bottom that demonstrates this)
Step 2: Brace the table so it does not tip over.
Step 3: Put the legs on horizontally, starting from the bottom legs (make sure the holes line up on each leg across from one another). Torque the bolts to 30 ft. lbs.
Step 4: Stand the table up now that all legs are on. Remember, the table weighs upwards of 200 lbs - 400 lbs depending on the size, so be very careful (this is where your friend can help)